2-7/8″ 2500 PSI Fiberglass Tube

Use the designation 2-7/8 in. 2500 PSI fiberglass tube when requesting this product. Confirm the offered configuration against a dimensioned drawing and its pressure-temperature rating before placing an order.

Confirm the size and rating

• Dimensions: confirm whether 2-7/8 in. identifies a nominal size or a finished outside diameter. Request the body outside diameter, inside diameter, wall thickness and tolerances on the same drawing.
• Pressure and temperature: request the conditions under which the 2500 PSI designation applies, including temperature, fluid, joint type and the design or test basis.
• Connection: provide the mating thread or connection drawing, sealing requirements and any gauge requirements.
• Length: specify the required useful length and permitted length tolerance.

Prepare a tubing inquiry

Include the intended well or transfer service, fluid composition, operating and design conditions, required quantity and delivery destination. State any material, inspection or certification documents required by your project.

A product designation alone is insufficient to confirm compatibility with an existing tubing string. Request a size-specific datasheet and drawing so the pressure rating, temperature limit and connection can be reviewed together.

Compare GRE tubing and epoxy resin tube, or send your drawing and operating conditions to IFGS.

A technical datasheet is not published on this page. Request the applicable dimensions, ratings and supporting documents for your project. Request the product datasheet.